ICARUS Omni, the ultimate 7-cell tapered canopy. This all purpose canopy offers soft on-heading openings, predictable flight characteristics, light toggle and riser pressure, and greater flare than any other 7-cell design. The Omni is ideal for intermediate and/or experienced skydivers, usable for all facets of modern skydiving.
The ULTIMATE 7-cell
The ICARUS Omni is a 7-cell, semi elliptical tapered canopy all zero porosity canopy, designed as an all purpose canopy with soft on-heading openings, predictable flight characteristics, light toggle and riser pressure and with the added advantage of an increased glide ratio and greater flare power when compared with many other 7-cell designs.
The RESULT is a fun to fly, enjoyable, practical, small volume, easy to pack, all around 7-cell canopy useable for all facets of modern skydiving.
At lighter wing loadings (below .9 psf) it is a good transition canopy or for someone who likes to take it easy. At heavier wing loadings (up to 1.5 psf) it will have noticeable performance while maintaining soft openings and great landings.
*Recommendation: Make your canopy selection based on canopy performance characteristics according to parachutist skills and activity.
** Pack Volumes are for reference purposes only. Figures could vary +‐ 10% or more depending on climate conditions, storage, use degradation, packing techniques and environment.
Intermediate and/or experienced skydivers, usable for all facets of modern skydiving.
Wing type: Semi elliptical tapered
Recommended Wing loading (psf): 0.75-1.5
ICARUS WORLD – USA1407 Flightline Boulevard. Suite 11.Deland, Fl 32724USA
+1 386 236 68 email@example.com
ICARUS WORLD – EUROPEPol. Ind. Ramassar c/Valles s/n08520 LAS FRANQUESAS DEL VALLESSPAIN+34 93 849 64 firstname.lastname@example.org
Our current estimated lead time for our sport production line is 11 weeks, depending on fabric availability. It’s possible that they may pull yours for production in as little as 6 weeks! Tandem TX2 production is a around 8 weeks. With that being said, we expect our 2023 average lead time to be maintained as low as 10 weeks. Why or how you may ask? Well, last year we doubled the production line for the TX2’s and we hope to do it again this year.
We all know that the world is in short supply of products, and it is no different for canopy fabric. Therefore, we have gone ahead and included current unavailable colors on the 3D design program. We did this in hopes that by the time your canopy is up for production we may have the fabric, if not, we will reach out and see if you want to change some, or all of the colors so we may keep moving on. There may also be a chance that if the fabric gods line up just perfectly, meaning the factory runs out of a certain combination of colors, then they will pull from were ever they can to keep the floor in action. This may be an order that has only been in the queue for just 2 weeks!
SUPPORT & FAQS